1. Home /
  2. Models /
  3. Microsoft Exchange /
  4. Monitoring Model Microsoft Exchange Server 2013 with OpMon

Monitoring Model Microsoft Exchange Server 2013 with OpMon

Objective

Use this OpMon Model to monitor Microsoft Exchange Server 2013, through NSClient++.

Target Audience

OpMon admins who wishes to monitor Microsoft Exchange Server 2013.

Prerequisites

  • OpMon 7.0 or higher.
  • Have the OpMon installed.
  • Have the NSClient++ installed, how to make the installation follow this documentation.

 Available Services

  • Services
    • HostControllerService
    • MSExchangeADTopology
    • MSExchangeAntispamUpdate
    • MSExchangeDagMgmt
    • MSExchangeDelivery
    • MSExchangeDiagnostics
    • MSExchangeEdgeSync
    • MSExchangeFastSearch
    • MSExchangeHM
    • MSExchangeImap4
    • MSExchangeIS
    • MSExchangeMailboxAssistants
    • MSExchangeMailboxReplication
    • MSExchangePop3
    • MSExchangeRepl
    • MSExchangeRPC
    • MSExchangeServiceHost
    • MSExchangeSubmission
    • MSExchangeThrottling
    • MSExchangeTransport
    • MSExchangeTransportLogSearch
    • MSExchangeUM
    • MSExchangeUMCR

Applying the Monitoring Model

On the hosts or services management area, click on “+” icon to add a new Host, like the image below:

In this area, select the Exchange Model Category:

Then click on “Use This Model” on Microsoft Exchange Server 2013:

This model could be applied on Exchange host, or if you wish, you can add a new host just for this monitor. If you wish add a new host, click on: “Add a new host manually”:

In this area insert the relative information about the Host, in this case the Exchange host in question and click in “Create a new host”:

In this area, with the host selected click in “Next”:

Then you will see an screen like below, where are informed the Windows information like IP.

To make the service definitions, just navigate through the services using the buttons “Next” and “Back”:

After concludes the definition of services, advance to the revision area of included services. Enjoy to observes which be possible expand the revision area of hosts and services, just click on “+” icon, like below:

As you can see, in this area it is possible to make changes if necessary. When the definitions are make, just click in “Finalize” to conclude the model application process.

Done! The elements are included with success.

Updated on 31/08/2021

Was this article helpful?

Ficou com alguma dúvida?

Perguntas & Respostas

Participe da nossa comunidade e tire dúvidas ou compartilhe respostas e ideias.

Participar

Professional Support

Não encontrou a resposta que procura? Não se preocupe, estamos aqui para ajudar!

Abrir chamado

Treinamento Online

Através da plataforma Udemy, você encontra todos os treinamentos das nossas soluções.

Inscreva-se