1. Home /
  2. FAQ /
  3. OpCEM /
  4. How does OpCEM auto-adjust work?

How does OpCEM auto-adjust work?

Whenever occur “timeout” (overcome the time to execute the step), the robot will use the options to automatic adjust, for this, know more about each option available:

  • By image: Will be made an apoximation betwen image visualized on screen and image expected to next step, using as margin of error the tolerance defined on this area.
  • By Coordenated: Whenever the image of step is not found, the robot will save the image visualized on screen and will made all commands configured for the step, using the image of next step to validated the step that the image is not found. If located the image of the next step the image of current step will considerated as valid, otherwise, the execution will be closed. For this reason the robot will not adjusted on the last step.
  • Desativated: Desativated: If the expected image is not found the execution will concluded without any adjustment..
Updated on 01/09/2021

Was this article helpful?

Ficou com alguma dúvida?

Perguntas & Respostas

Participe da nossa comunidade e tire dúvidas ou compartilhe respostas e ideias.

Participar

Professional Support

Não encontrou a resposta que procura? Não se preocupe, estamos aqui para ajudar!

Abrir chamado

Treinamento Online

Através da plataforma Udemy, você encontra todos os treinamentos das nossas soluções.

Inscreva-se